1x DVI input, 2x DVI outputs.
Gefen's DVI Splitter is a stackable distribution hub that sends the same DVI graphics source to two or more DVI digital displays (flat panels or projectors). It is a flexible solution that accommodates multiple digital video displays, and when multiple DVI Splitters are connected together, they can be used to create a 1:4 or a 1:6 distribution (one DVI input / multiple DVI display outputs). When multiple units are stacked you can switch between all the inputs into all the outputs
with the RMT-16 remote. The configuration of stacking multiple units must be done by Gefen professionals.
How it works
The DVI Splitter is connected with a DVI (male to male) cable from the DVI graphic source to the DVI Splitter input. There are two DVI outputs in each module. DVI output one is the primary connection and is used for the main display. DVI output two follows the main display. The DVI Splitter is using a unique DVI Bus? technology to connect multiple splitters without sacrificing a DVI output connection.
Note: The DVI displays attached to the Splitter must be able to run at the same native resolution.
The DVI Splitter will only output a DVI-D (DVI digital) signal. If you're using a DVI-I cable, it will ONLY pass the digital signal. Using a DVI-I to VGA adapter off of any output will not pass an analog signal. A DVI-D to VGA Conversion Box is required to convert to an analog signal.
DVI, HDCP & HDMI Defined
Package Includes:
* the DVI splitter
* 6ft DVI cable M-M
* 5v Power Supply
Features:
* Connects computers with DVI graphics to two DVI compatible monitors or projectors
* Allows simultaneous display of one source
* Maintains highest DVI single link 1920 x 1200 video resolution
* Built-in DVI Detective for storage of EDID data
* Supports DDWG standard for DVI monitors
Specifications:
* Video Amplifier Bandwidth: 1.65 Gbps
* Input Video Signal: 1.2 volts p-p
* Input DDC Signal: 5 volts p-p (TTL)
* Single Link Range:1080p/1920 x 1200
* DVI Connector: DVI-I 29 pin female (digital only)
* Remote Connector: RJ-11
* Power Supply: 5V DC
* Power Consumption: 10 watts (max)
* Dimensions: 4.5"W x 2"H x 5.2"D
* Shipping Weight: 4 lbs. |
